|
|
 |
DBM Module
Input voltage : 300Vdc, ±10%
Three-phase output voltage : 180V
DBM-PS Power Supply
Three-phase input voltage : 230Vac, ±10%, 50/60 Hz
Auxiliary power supply input voltage : 110Vac (optional) or 230Vac, ±10%, 50/60 Hz
Auxiliary input power : 55W for 3-axis module, 60W for fans pair
BUS BAR output voltage : 300Vdc
Interfaces
Digital
- Output for simulated encoder (optional)
- Serial Link RS485(1200-19200 Baud) full-duplex to manage:
- Acceleration limits
- Autophasing
- Control parameters
- Monitoring of internal parameters
- Range of analog interface
- System status
- Output for Drive OK axis 1, axis 2, axis 3 (TTL compatible)
- On-Off (Optoisolated)
- Drive OK
- Drive Enable
- Motor OK
- Reference Enable
Analog
- Input velocity (see MR command)
- Resolver differential input signals
- Peak current limit input
- Output tachometer (see ET command)
- Max current, velocity reference, velocity error outputs (see ES, SO commands)
Protection
Module
- Auxiliary voltage out of tolerance
- BUS BAR overvoltage
- BUS BAR undervoltage
- Motor phase grounded
- Motor overtemperature
- Module overtemperature
- IT protection
- Abnormal resolver signal
- Short circuit on motor phases
- Non-coherent three-phase sequence
- Actual speed versus reference error
Power Supply
- Overtemperature
- Recovery unit not OK
|
|
REV DATE: 8/15/2006
©2024 SCR Controls, Inc.
3479 Gribble Rd., Matthews, NC 28104
PO Box 2368, Indian Trail, NC 28079
email:
|
|
|
This sight is viewed best viewed with the latest versions of
Edge and Chrome. |
A. Manufactured items:
MELLTRUM (SPECTRUM REPLACEMENT) ES100A ES125A ES150A ES150ARG ES200A ES200ARG ES222 ES2300RG ES2600RG ES2700 2400-8000 2400-8001W 2450-8000W
2450-8001W 2450-8010W 2450-8015W
EDDY CURRENT CLUTCH 1235 367 FOCUS 2 FOCUS1 FOCUS 1 REPLACEMENT BOULIGNY MARK ANDY SECO BALDWIN ENKEL CUSTOM AUTOMATION SYSTEMS MULTI DRIVE SYSTEMS ERC REPLACEMENT.
|
